Zippie Neptune, Directions For Use Manual, Page: 18 / 120

ENGLISH
18
Neptune Rev.1.0
18.0 Hip Pad Adjustment
Hip Pad Width
• Un-tighten allen key bolt (A) by a half turn using the 4mm
allen key supplied. Then slide the hip pad along the hip pad
bar (B) to set at the desired width.
• Re-tighten the allen key bolt (A) to secure the pad in place.
A
B
Fig.17.1
19.0 Pommel Adjustment
Adjusting Pommel Height
NOTE: The height adjustment can be used for removing the
pommel or adjusting accordingly to the height of the chair
cushion.
• Pull and hold out plunger (A) whilst moving the pommel up
or down to achieve the desired height.
• Release plunger (A) relocating it into one of the holes (B) in
the pommel bar. Always ensure the plungers are locked
securely in place, before use.
• The pommel can also be removed this way.
Fore and Aft Adjustment
Un-tighten allen key bolt (C) and move the pommel along the
slot in the metal pommel bracket.
Re-tighten bolt (C) to secure in place.
NOTE: You can get additional fore and aft adjustment by
removing the fixing screw (C) altogether then dismounting the
pad from the metalwork, rotating the metalwork 180°, re-fixing
the pad and replacing the bolt (C), tightening in place.
Fig.18.1
A
B
Fig.18.2
C