Zipper Mowers ZI-PS1000, User Manual

Page: 20 / 27

OPERATION
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 20
ZI-PS330 & ZI-PS1000
Regardless of all safety regulations, your common sense and your appropriate technical aptitude/training
are and remain the most important safety factor in the error-free operation of the machine. Safe working
depends on you!
11 OPERATION
Only operate the machine when it is in a perfect condition. Before each operation, a visual inspection of
the machine must be carried out. Safety devices and operating elements must be checked carefully.
Check screw connections for damage and tight fit.
11.1 Checking the scope of delivery
After receipt of the delivery, check whether all parts are in order. Report any damage or missing parts to
your dealer or the shipping company immediately. Visible transport damage must also be noted imme-
diately on the delivery bill in accordance with the provisions of the warranty, otherwise the goods are
deemed to have been properly accepted.
11.2 Requirements for the installation site
Place the product on a level, solid surface to prevent the product from tipping over.
Operate the product only when it is in perfect condition. Perform a visual inspection of the product before
each operation.
11.3 Operation
11.3.1 Charging the product / battery
There are 3 ways to charge the product.
charging with AC-charger
•
Connect the supplied AC adapter to the DC input and allow the
product to fully charge before use. During charging, the LCD
display will light up and the charging indicator will show the
battery level. The product is fully charged when the charge level
is 100%.
charging with solar panel
• Connect the output of the solar panel to the DC input and al-
low the product to fully charge before use. During charging,
the LCD display will light up and the charging indicator will
show the battery level. The product is fully charged when the
charge level is 100%.
charging with cigarette-lighter plug
• Connect the supplied cigarette lighter plug cable to the DC in-
put and allow the product to fully charge before use. During
charging, the LCD display will light up and the charging indica-
tor will show the battery level. The product is fully charged when
the charge level is 100%.