Zipper Mowers ZI-HS7H, Operation Manual

Page: 27 / 67

27
2.14 Troubleshooting and Fault Clearance
Disconnect the machine from the power supply prior to any checks performed at the ma-
chine itself !
Problem Possible Cause Remedy
Motor does not start.
 No power in wall socket  Check fuse box
 Extension cable defective  Unplug, check and use new one, if
 necessary
 Wrong supply, 400 V,
three-phase
t
 5-pole plug with 1.5 mm diameter
 Switch defective  Have it checked by electrician
Wrong motor direc-
tion.
 Wrong polarity
 Change polarity using a screwdriver
(electrician)
 Change polarity (electrician)
Splitter not movIng al-
though motor is running.
 Valve not opened, caused
by loose connection
 Tighten loose parts
 Oil level too low  Replenish oil
Splitter working, however,
with untypical noise and
vibration
 Oil level too low  Replenish oil
2.15 Disposal
Do not dispose your ZI-HS7H in the residual waste! Contact your local authorities
for information about best available disposal possibilities in your area. Drain fuel
from the fuel tank completely before disposing the machine. Disaggregate the ma-
chine into its components before disposing them.