Zipper Mowers ZI-HS18EZ, Operation Manual

Page: 31 / 57

Hydraulická štípačka / Hydraulic log splitters ZI-HS13E/ZI-HS18EZ/ZI-HS25Z / ZI-HS25EZ Strana 31
Model ZI-HS13E ZI-HS18EZ ZI-HS25Z ZI-HS25EZ
Motor (400V / 50Hz)
S6 40% IP54
4500W
S6 40% IP54
5100W
no Motor
S6 40% IP54
5500W
Log Size Diameter 30 cm 35 cm 40 cm 40 cm
Log Size Length 110 cm 110 cm 110 cm 110 cm
Maximum Force 13 t 18 t 25 t 25 t
Hydraulic Pressure 25,4 Mpa 24,9 Mpa 21,7 Mpa 21,7 Mpa
Hydraulic Oil Capacity 18 L 24 L 30 L 30 L
Ram Travel 94,5 cm 94,5 cm 94,5 cm 94,5 cm
Forward Speed 7,4 m/min 6,0 m/min 8,0 m/min 8,0 m/min
For. Speed under pressure 2,9 m/min 2,9 m/min 2,8 m/min 2,8 m/min
Retract Speed 4,3 m/min 4,7 m/min 4,3 m/min 4,3 m/min
Noise Pressure Level (L
pA
) < 75 db(A) < 75 db(A) < 75 db(A) < 75 db(A)
Vibration 2,5 m/s 2 2,5 m/s 2 2,5 m/s 2 2,5 m/s 2
Length 110 cm 154 cm 154 cm 154 cm
Width 112 cm 114 cm 114 cm 114 cm
Height 251 cm 252 cm 252 cm 252 cm
Weight 262 kg 315 kg 379 kg 382 kg
APPLICATION CONDITIONS
This log splitter is designed for operating under ambient temperatures b5°C and 40°C.
The surrounding humidity should be less than 50% at 40°C.
ELECTRICAL REQUIREMENTS
With 3 phase 400 Volt / 50Hz motor, the log splitter should be connected to standard 400V+10%
/ 50Hz+1%Hz. Electrical supply which has protection devices of under-voltage, over-voltage, over
current as well as a residual current device (RCD) which maximum residual current rated at 0.03A.
The mains connection and extension cable must have 5 wires = 3P + N + PE (3/N/PE). The mains
connection must have maximum 16 A fuse. Electrical connection rubber cables must comply with
EN60245 which are always marked with symbol H 07 RN. Cables should be identified, as it is a legal
requirement.