OPERATION
20
ZI-ET260
13
OPERATION
Only operate the machine when it is in a perfect condition. Before each operation, a visual inspection
of the machine must be carried out. Safety devices and operating elements must be checked carefully.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection
for damage and if tightened properly. Replace any damaged parts before operating the machine.
13.1
Operation instructions
WARNIN G
Unplug battery before all maintenance and settings!
N OTE
•
Never remove the battery while the machine is running.
•
In case of longer standstill, press the shut-down button.
•
Use the electric motor only with sufficient battery charge.
•
Pay attention to the limits of use concerning slopes and load (see sketch below)
13.2
Operation
13.2.1
Start electrical support
1.
Turn ON-Off-Switch (1) to Position „I“:
