SAFETY
25
ZI-ZSM600
Put on your personal protective equipment before working on the machine.
12.3
Safety devices
The machine is equipped with the following safety devices:
A self-locking Emergency Stop button to stop dangerous
movements at any time.
Safety guard (fixed): The saw blade guard is used to avoid
touching the saw blade.
Safety guard (fixed): To avoid contact with the saw blade.
Safety guard (fixed): To avoid contact with the saw blade.
12.4
General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the following
points must be observed in addition to the general rules for safe working:
•
Check the machine for completeness and function before starting. Only use the machine if
the separating and other non-separating protective devices required for machining have are
fitted.
•
Make sure that the guards are in good working order and properly maintained.
•
Select a level, vibration-free surface as the installation area.
•
Ensure sufficient space around the machine!
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
Ensure a clean working environment.
•
Keep the area around the machine free of obstacles (e.g. dust, cut parts, etc.).
•
Only use tools that are in perfect condition and free of cracks and other defects (e.g. defor-
mations).
•
Remove tool keys and other adjustment tools before switching on the machine.
•
Check the machine's connections for strength before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorised recommissioning.
•
The machine may only be operated, maintained or repaired by persons who are familiar and
who have been informed about the dangers arising from this work.
