OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-ZWM100 / ZI-ZWM120
15.3
Operation
1.
Height adjustment of the telescopic legs
Before starting the machine, the telescopic legs must
be adjusted to the desired height (4 levels), so that it
is possible to empty the drum into buckets or
wheelbarrows without any obstruction.
•
To do this, position the machine on its four
wheels.
•
Disassemble the four locking bolts (1).
•
Set the desired height (2) of the telescopic legs.
•
Reinstall the locking bolts (1) and set the
machine up again.
2.
Bucket stand
To empty the mixed material from the drum into
buckets, use the bucket stand (3).
•
Flip the bucket stand (3) into horizontal position.
3.
Safety grid
NOTICE:
The safety grid (4) must already be
installed on the material outlet before the machine is
put into operation.
4.
Closing the drum
•
Close the protective grille (5) and secure it
against unintentional opening with the rubber
lock (6).
•
Only then the machine can be put into
operation.
•
Turn on the Machine. The mixing arms must
rotate before you load the drum.
NOTICE:
The machine is equipped with a safety
switch that stops the motor as soon as the protective
grille is opened.
