ZIPPER MASCHINEN ZI-CRM40V-AKKU, User Manual

Page: 27 / 37

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  27
ZI-CRM40V-AKKU
15 TROUBLE SHOOTING
WARNING
Danger due to electrical voltage! Manipulating the machine when connected to the
power source can cause serious injury or death. Always disconnect the machine from the
power supply before troubleshooting and secure it against unintentional restarting! Repair
work may only be carried out by qualified personnel!
When you are unable to carry out necessary repairs properly and/or do not have the required skills to
do so, always contact a specialist to help you in solving the problem.
Trouble Possible cause Solution
Motor does not start  Safety switch is not plugged in  Plug in safety switch
 Battery is not plugged in  plug in battery
 Battery is not charged  Recharge battery
 Safety switch is damaged  Check safety switch
 Power switch is damaged  Check safety switch
Unusual, loud noises and
excessive vibrations
 Loosen cutting tool  Tighten cutting tool
 Debris on the cutting tool  Remove derbies
 Cutting tool damaged  Change cutting tool
Poor pickup of the grass  Wrong cutting height  Set to correct cutting height
 Full grass box  Empty grass box
Poor cutting result  Blunt cutting tool  Sharpen or change cutting tool
 To high grass  Set to correct cutting height
Battery cannot charged
anymore
 Contact failure  Check contact pins
 Battery damaged  Change battery