OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
30
ZI-BRM52EST
17.3.2
Adjusting cutting height
The cutting height is set centrally with one lever
1.
Pull the cutting height lever sideways
2.
Push the lever in desired positon and allow the lever to
engage into one of the slots
Lower position: 25mm
Upper position: 70mm
17.3.3
Starting the engine
With Recoil starter
Pull the engine lever against the push handle.
Pull out the starter handle briskly
Guide the starter-handle slowly to the rope guide back as soon
as the engine starts.
With E-Start
Opening the battery drawer
Place the charged battery on the insertion grooves and push it
in until the battery clicks into place
Closing the battery drawer
Pull the engine start bracket to the handle
Press E-start button until engine starts
Release the E-start button when the engine is running
17.3.4
Stopping the engine
Release the engine lever to stop the engine and the blades
17.3.5
Activating and de-activating the wheel drive
Wheel drive activating
Press
the drive lever to the
push handle and
the mower
will
move
forward
when the engine is running
.
Wheel drive de-activating
Antriebsbügel (2) loslassen und der Radantrieb wird
deaktiviert.
