ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
20
ZI-EWB500-AKKU
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location
13.1
Maintenance plan
After each workshift:
•
Check the cables (tight fit, damage)
13.2
Cleaning
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
•
Clean the outer parts with a damp sponge.
•
Never clean the electronic parts with water!
•
Check the machine and remove the deposits and / or residues with a brush
13.3
Storage
•
Clean thoroughly all components before storage.
•
Store all components separately in a dry area at not less than -10 ° C.
•
Charge the battery fully before storing.
N O T I C E
•
During longer standstill but at least after one month charge the battery.
13.4
Disposal
Do not dispose the machine and the battery in residual waste. Contact your local
authorities for information regarding the available disposal options. When you buy at your
local dealer for a replacement unit, the latter is obliged to exchange your old.
14
TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, UNPLUG THE BATTERY.
Trouble
Possible cause
Solution
No electrical support
•
Battery is not charged
•
Recharge battery
•
Motor stucks
•
Check motor
•
Power switch is damaged
•
Check switch
•
Broken or loose cables
•
Check cables
No charging of battery
•
Loosen cable
•
Check cable connection
