ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-STE6700DH & ZI-STE7500DSH
•
Risk of fire and explosion:
NEVER refuel fuel or engine oil while the machine is in operation or is hot.
When refuelling and at places where fuel is stored not smoke or allow open flames or sparks.
Do not overfill the fuel tank and avoid the spillage of gasoline during refuelling. If fuel is spilled,
make sure the area is completely dry and cleaned before starting the engine.
Make sure that the filler cap is tightly closed again after refuelling safely.
•
Chemical risks
Never use or refuel a gasoline or diesel engine in a closed area without adequate ventilation.
Carbon monoxide emissions from the internal drive units of the engine can cause in confined
spaces through inhalation health effects and death. Therefore, use the machine only in well-
ventilated rooms or outdoors in operation.
Liquid fuels can cause serious damage on the skin and the environment.
•
Risk of electric shock
Direct electrical contact may cause electric shock.
Never touch the unit with wet hands. Provide adequate grounding.
•
Hearing damage
A longer stay in the immediate vicinity of the running unit may cause hearing damage.
Wear ear protectors!
Due to the design and construction of the machine, hazardous situations may occur which are identified
as follows in these operating instructions:
DANGER
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious
injury or even death.
CAUTION
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTICE
A safety note designed in this way indicates a potentially dangerous situation which, if
not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of the
machine.
Safe working depends first and foremost on you!
12
ASSEMBLY
12.1
Check scope of delivery
After delivery, check the machine immediately for transport damage and missing Parts.
ZI-STE6700DH:
The machine is delivered almost fully assembled. If desired, the transport unit can be mounted and
battery have to be connected.