ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
26
ZI-TKS315_400V
14
ASSEMBLY
Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
14.1
Assembly
Put the main part 1 on an appropriate
work bench.
Take two M6x16 hex head bolts, two M6
washers and two M6 nuts and mount
part 2 to the main part 1. Screw the
guide rails along with the feet. Make
sure longer bolts for rails are used.
Using two ST4.2x13 guide bolts,
mount part 1 to part 2 if it is not
mounted.
Take four M6x16 hex head bolts, four
M6 washers and four M6 nuts and mount
part 3 to the main part 1. Bolts to be
inserted to positions A, B, C and D. The
bolts must not be tightened too much.
