MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
30
ZI-KS210
15
MAINTENANCE
A T T E N T I O N
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all connecting
parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment is essential for a smooth and a clean cut.
Store the machine in a closed, dry location.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
15.1
Maintenance plan
Loose or lost screws
Prior to every operation
Damage of any part
Prior to every operation
Saw blade condition
Prior to every operation
Clean machine
After every operation
Empty dust bag
After every operation
Sharpen saw blade
When necessary
Change saw blade
When worn or defect
Change carbon brush
When carbon brush is worn ( < 4mm )
