ZIPPER MASCHINEN 9120039231846, Operation Manual

Page: 31 / 40

TROUBLESHOOTING
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at Seite31
ZI-GHAS2800
16 TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble Possible cause Solution
Engine will not start  The overload protection has
responded
 power failure
 Safety switch not closed to
the collecting container capa-
ble
 Removed jammed parts. Let the
motor cool down for about 2min and
push the reset button of the motor
protection.
 Check the mains cord, the plug and
the fuse in your home port and the
residual current circuit breaker
 Make sure that the On-collecting
vessel, and be locked in the safe po-
sition
The material to be
chopped is not feeding  The chopping blade rotates
backwards.
 The media is jammed in the
feed hopper.
 Change the direction of rotation.
 Push Reverse switch and turn the
shredder on. Put out the material
from the shredder.
The cutting of the ma-
terial is not good  The distance of the baffle to
the cutting blades is wrong
 Adjust the right distance with the
adjusting knob
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION
TO THE ELECTRICITY GRID.
N O T I C E
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the prob-
lem.
Autogoods “130”
130.com.ua