31
Driver Bearing Replacement (optional)
Insert the threaded rod through the bearing on the outboard side of
the driver. Slide a second 6803 26x17 tool onto the threaded rod.
Thread the Press Tool handle onto the threaded rod.
Turn the handle clockwise to press the bearing into the driver body
until it is hand-tight.
Do not overtighten the bearing.
Remove the tools.
NOTICE
To prevent damage when pressing the bearing into the driver body,
make sure that the bearing press tools contact both the inner and
outer bearing races or bearing bores and not the driver body.
Place the driver on a flat surface, inboard side up. Insert a new Zipp
6803/61803 driver bearing into the inboard side of the driver body,
with the
black
seal facing outward.
Note:
Ceramic bearings have
blue
seals on both sides of the bearing;
installation orientation is not important.
Insert a 6803 26x17 tool onto the bearing.
Insert the threaded rod through the bearing on the inboard side of the
driver. Slide a second 6803 26x17 tool onto the threaded rod.
Thread the Press Tool handle onto the threaded rod.
Turn the handle clockwise to press the bearing into the driver body
until it is hand-tight.
Do not overtighten the bearing.
Remove the tools.
NOTICE
To prevent damage when pressing the bearing into the driver body,
make sure that the bearing press tools contact both the inner and
outer bearing races or bearing bores and not the driver body.
5
6803 26x17
6
6803/61803 Driver Bearing
6803 26x17
7
6803 26x17
