Zip HydroTap G5 Classic Plus User Manual Download

Page: 7 / 44

806835 v1.00 12.20 G5 User guide

SECTION 2: Using the HydroTap

2.2 Touch-Free Wave

Touch-free

Controls

Touch-free

sensors on the tap top,
back and sides.

Touch-free

Lights

Dispense

sensors

Safety

sensor

(at back)

Light

Touch-free

Clearance requirements

100mm

RED

Boiling & safety

sensors activated, water
dispensed.

BLUE

Chilled sensor

activated, water dispensed.

WHITE

Sparkling sensor

activated, water dispensed.

PURPLE

Lock mode on (when tap is idle).

Flashing RED

Sensor activated incorrectly; hand

may be too close to sensor, sensor has been
touched or covered.

WHITE / BLUE / RED Cycling 5 to 10 seconds

Filter needs replacing, CO2 warning (G5), unit
is in an error mode (refer to Command Centre
screen).

WHITE Flashing rapidly

Sensors calibrating when

power is first applied to the tap. Allow 10 seconds.

Summary of Contents for HydroTap G5 Classic Plus













































Search results

Summary of Contents for HydroTap G5 Classic Plus

Reviews:

Related manuals for HydroTap G5 Classic Plus

Brands by name

Popular brands

Zip HydroTap G5 Classic Plus, User Manual

Search results

Summary of Contents for HydroTap G5 Classic Plus

Reviews:

Related manuals for HydroTap G5 Classic Plus

Brands by name

Popular brands