Zip HC03CTU15 Installation Instructions & User Manual Download Page 3

Page: 3 / 28

Installation instructions & user manual

T210029 v2.01 Dec 2020 - ZIP HC03CTU15

Technical support

Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk

GENERIC SAFETY INFORMATION

• Please read the instructions in this manual before installation and

use.

• Connect only to a wholesome (cat 1) mains drinking water

supply.

• Water pipe connections and fixtures directly connected to a

wholesome (cat 1) water supply shall be sized, installed, and
maintained in accordance with local regulations.

• Ensure that it is possible to disconnect the electrical power

supply either by removing the mains plug or via a double pole
isolation switch with a contact separation of at least 3mm in all
poles.

• Ensure that the water dispenser is not resting on the power

cable.

• Do not position other electrical equipment in the immediate

vicinity of the water dispenser.

• Do not use electrical extension leads or adapters.
• Turn off the mains power supply and isolate the water supply

during periods of prolonged non-use.

• Do not damage the condenser, it contains highly flammable

R600 refrigerant gas.

•  Keep away from heat sources.
•  Only install in locations overseen by trained personnel.
•  Keep surrounding areas dry to avoid the risk of slipping.
•  Sanitise before use.

Warnings

Summary of Contents for HC03CTU15





























Search results

Summary of Contents for HC03CTU15

Reviews:

Brands by name

Popular brands

Zip HC03CTU15, Installation Instructions & User Manual

Search results

Summary of Contents for HC03CTU15

Reviews:

Brands by name

Popular brands