background image

801981UK - Commercial Chilled,sparkling User manual - Sept. 2016- v3.02 

Page 15 of 20

3.

         

LCD Screen operation - Section G

Energy modes

This mode allows the HydroTap

®

G4 to go into energy saving mode. There 

are two options available: sleep mode and on/off mode.

It is recommended to recalibrate the lux sensor after selecting any of the 

lux sensor options from the sleep mode menu. (See page 11, Lux sensor 

calibration).

In sleep mode the unit will go to “sleep” after a 2hr period of inactivity. The 

chilled water will be ON or OFF.

• 

Press the [MENU] button for main  

menu.

• 

Press the [Settings] button.

• 

Enter your 4-digit password and 

press [Enter].

• 

Press the [Energy Modes] button. 

• 

Press the [Sleep Modes] button 

then in the next screen, use the 

up and down arrow to select sleep 

mode from the 4 options in the 

table below.  

Sleep Mode

Light 

level

Time 

delay

State

Chiller

2 Hours > OFF

N/A

2 Hr

OFF

OFF

Lux Sensor > OFF

Dark

N/A

OFF

OFF

Lux Sensor or 2 Hr > OFF

Dark

2 Hr

OFF

OFF

Disable

N/A

N/A

ON

ON

To activate sleep mode

Zip Chilled Sparkling

Sleep Modes

Zip Chilled Sparkling

15:11 Tue 26, July 2016

On/Off Modes

Menu

HOME

Summary of Contents for Elite HydroTap G4 range





















Reviews: