Zip DEX Installation, Maintenance And User Instructions Download Page 19

  August / 2014 

Page 17  

DEX & DBX Installation, Maintenance and User Instructions V1.05

Warranty

The Zip appliance you have chosen is precision-built from the finest materials 

available and should give many years of trouble free service.
Certain warranties may be implied by law into your contract with Zip.  
The warranty provided below is additional to these implied warranties and 
nothing set out below shall limit your statutory rights or rights at law.
Zip Heaters (UK) Ltd warrants that, should any part fail within 12 calendar 
months of installation, that part will be repaired or replaced free of charge by 
Zip or its Distributor or Service Provider, except as set out below, provided the 
appliance is installed and used strictly in accordance with the instructions  
supplied, and that failure is not due to accident, misuse, abuse, unsuitable 

water conditions, or to any alteration, modification or repair by any party not 

expressly nominated by Zip.
No costs are payable by the customer other than any mileage or  
travelling-time charges incurred by a Zip Service Provider or the cost of 
removal, cartage and re-installation of any component of the appliance if it 
needs to be returned for repair to Zip or its Distributor.
This warranty does not cover damage resulting from non-operation of the  
appliance or consequential damage to any other goods, furnishings or property. 
Zip does not exclude, restrict or modify any liability that cannot be excluded, 

restricted or modified or which cannot, except to a limited extent, be excluded, 
restricted or modified as between the owner or user and Zip under the laws 

applicable.
Furthermore, this warranty does not displace any statutory warranty, but, to 
the extent to which Zip is entitled to do so, the liability of Zip under any   
statutory warranty will be limited at Zip’s option to the replacement of the  
appliance or supply of equivalent appliance, the payment of the cost of  
replacing the appliance or acquiring an equivalent appliance, or the payment 
of the cost of replacing the appliance or acquiring an equivalent appliance, or 
the payment of the cost of having the appliance repaired or the repair of the 
appliance.

The use of this crossed out wheeled bin logo indicates that this 
product needs to be disposed of separately to any other household 
waste.
Within each of the European Union member countries, provisions 
have been made for the collection and recycling of unwanted 
electrical and electronic equipment.
In order to preserve our environment we ask that you dispose of 
this product correctly. Please contact Zip Customer Service for 
advice on 0845 6 005 005 or 0345 6 005 005

Summary of Contents for DEX




















Reviews: