Zip Line Fun ZL70 Installation Instructions Manual Download Page 3

TOOLS REQUIRED

1.  Ladder 

     6. 

Wire 

Cutter

2.  Pliers or Vise-Grips 

 

 

 

7.  Electrical Tape

3.  Socket 

Wrench 

    8. 

Friend

4.  Adjustable Wrenches x2 (optional)  

 

9.  Tape Measure

5.  Hammer

Parents Please Note: Observing the following statements and warnings reduces the likelihood of serious or fatal injury.

 

1.   

DO NOT allow the use of ZL70 by children without adult supervision.

2.   

DO NOT attach ZL70 to a tree or other upright without first determining if the tree or other upright, at the point of 

attachment, will support at least 1250 pounds.

3.   

ALWAYS check the support structure, attachments, trolley, cable clamps, turnbuckle and cable for integrity before 

allowing the use of ZL70.

4.   

DO NOT attach ZL70 closer than 6 feet to any other playground equipment.

5.   

ALWAYS use a stable platform to stand on before beginning the ride.

OPERATING INSTRUCTIONS
Please Note: Observing the following statements and warnings reduces the likelihood of serious or fatal injury. 

ZL70 Zip Line has been designed to provide children and adults with all of the enjoyment and traditional fun of a smooth, safe and 

exhilarating ride through the air from one point to another. 

1.  Follow the installation instructions carefully. 

2.  Follow the rules of safe use.. 

3.  Stand on a stable platform and grip the handles of the trolley directly overhead with both hands. 

4.  Lift your feet off the platform and ZL70 will do the rest.

5.  ZL70 will slow and stop before reaching the other end of the ride. Drop gently to the ground onto both feet. 

PARTS LIST

A. 

Turnbuckle 

 

      1 

B.  Cable clamps with lockwashers, nuts and thread caps 

 

6 sets

C.  Galvanized aircraft cable sling    

 

 

 

1 sling with loop at each end

D.  Galvanized aircraft cable   

 

 

 

 

1 coil (approximately 74 feet long)

E. 

Trolley 

 

       1 

F. 

 

Thread 

Caps 

      12 

G.  Thimble  

 

 

 

 

 

 

Please check all parts against this list immediately. In case of discrepancy, email [email protected].

C 1

D 1

F 12

E 1

1

A 1

B 6

Thimble

Summary of Contents for ZL70















Reviews: