INSTALLATION GUIDE
Leg Rest Installation
In order to install the footrest make sure that the connecting axis points of the footrest lines
up with the seat base as shown in the diagram below. Once aligned tighten the "fixed
screw". An Install video will be available online for more detailed instructions. Once
completed connect the electrical wire and air pipe as shown in the left illustration.
As a final step make sure the air hose is not bent or twisted anywhere before zippering up
the seat cushion to the leg rest.
MOVING THE MASSAGE CHAIR
When moving the chair, one person
should tilt the back and the other lift
up the footrest to 45 degrees. Then
push the chair forward via casters.
The back should not be reclined too
low in case of the chair falling down
and causing damage and harm to
property or persons.
Please grasp the bottom of the
side plate (not the base) with your
hands and lift it up.
Due to the heavy weight, the chair
must be carried by two or more
people. Also please be careful
when handling to avoid back
strain.
8
Summary of Contents for VIP
Page 1: ......
Page 14: ...HOW TO USE 13 ...
