16
and the value go back to 300 seconds. When it countdown to
zero, this Client/Station will be kicked out from this table.
RSSI
: It shows the signal strength of this Client/Station in dBm unit.
Advanced Settings
These settings are only for more technically advanced users who have
sufficient knowledge about wireless LAN. These settings should not be
changed unless you know what effect the changes will have on your
device. The default setting is optimized for the normal operation. For
specific application, setting configuration will required highly attention to
reach optimistic condition.
Note
：
Any unreasonable value change to default setting will reduce the
throughput of the device.
Beacon Interval
Beacons are the packets sending by Access point to synchronize the
wireless network. The beacon interval is the time interval between
beacons sending by this unit in AP or AP+WDS mode. The default and
recommended beacon interval is 100 milliseconds.
