3.3.6 WDS Settings
When you set up the WDS system, you should consider follow things:
1. ALL your ZPlus-B191-ODs must have the same channel.
2. ALL The ZPlus-B191-ODs and Clients device must at the same subnet network.
3. WDS system support both WDS device and client connection, if you want to let only the
WDS devices to connect, you can enable the “Access control” function and don’t add
any MAC address to the list. Then the system will automatic only allow the WDS device
to connect.
4. The following figure is the example for your reference.
IP:192.168.2.2
Mask:255.255.25.0
IP:192.168.2.3
Mask:255.255.25.0
ZPlus-B191-OD:
ZPlus-B191-OD:
:
6
4
5.0
SSID: C1
SSID: C2
:
6
3
5.0
CHANNEL
CHANNEL
IP:192.168.2.25
IP:192.168.2.25
MASK:255.255.25
MASK:255.255.25
27
