3.3.4 Wireless Access Control
In this page you can have a simple firewall to prevent the unauthenticated customer to
connect to our AP.
1. If you add the filtering MAC address to allow the connection, you must carefully do
with the “Wireless Access Control”, when you enable the access control, you need
to add the MAC address that be allowed to connect to the AP.
2. When you type in the MAC address, you can just key in the MAC address number.
3. The Current Access Control List shows the clients that connect to the AP. If you
want to clean the control list, please carefully using it.
When you delete all in the control list, then your wireless access control function
still enable and you will not connect to the AP again by using wireless port again.
24
