6
1
2
3
4
5
2.3
BUTTONS AND LEDS
Group Button
Reset Button
Power LED
Ethernet Link /
Act LED
PLC LED
500 Mbps Powerline Bridge
ON:
Power on and ready.
Blinking:
PLC group pairing.
OFF:
Power off.
ON:
PLC connection detected.
Blinking:
1. Fast: Powerline data rate > 60Mbps
2. Normal: 60Mbps > Powerline data rate > 10Mbps
3. Slow: 10Mbps > Powerline data rate
OFF:
No PLC connection detected.
(They are too far to communicate or it is alone in its logical network).
ON:
Ethernet connection detected.
Blinking:
Network traffic in transaction.
OFF:
No Ethernet connection detected.
Press 10 seconds:
Randomly generate a new PLC network group
name.
Press 2 to 3 seconds:
Start paring with the other PLC device. Paring
procedure keeps for 2 minutes or ends automatically when they are
paired. It can be stopped manually by pressing the button for 2 to 3
seconds again.
Press 1 second:
Reset to factory default setting.
Press the button when the Device is powered (not in standby mode)
