Using the right arrow key on your remote, toggle to the right and then using the down arrow key, toggle down to
Factory Default.
Press
OK
and enter in
"0000"
The default password is "
0000
" unless you have changed it, If 0000 doesn't work, use "1269" instead. The password will revert to
"0000" after a Restore to Defaults".
Select
Yes
and then when requested
pull
the small black power plug, out of the
right hand corner
of your Zinwell Freeview
Receiver.
You should now have a blank screen,
wait
10 seconds and then
reconnect
the power plug
Step 3
.
Once rebooted, you will see a screen that will have
Satellite
,
Country Name
and
City Name
,
Please select your nearest city using the remotes arrow keys, then press
OK and
proceed. (It will now scan for Freeview
Channels, this may take 90 seconds)
Step 4
You will now be at TV One, with your remote press
Menu
Then select
System Installation
Then use the right arrow key to toggle to the right and then select
Add Satellite
(See photo above)
Enter in the same password “0000”
