Power Button
The Power Button is the physical push button at the top of
the Control Panel. To power ON, press once and wait three
seconds for the speed and charge indicator lights to come
on. To power off, press once and wait for the lights to go
out.
Always turn the power OFF before exiting the Zinger.
The Zinger has no "OFF" key. Simply remove the battery
to prevent unwanted use.
Auto Shut Off
If the Zinger is left on, the power will automatically shut off
after 10 minutes of inactivity. The indicator lights will be
out. To turn the power back on, press the Power Button
once, wait three seconds, then press the Power Button
again and wait three seconds for the indicator lights to
come on.
Charge Indicator Lights
To read the charge indicator lights turn the Zinger off, then
back on and wait 20 seconds. Due to voltage fluctuations
during use, reading the charge indicator lights during use
without first restarting the Zinger will likely result in
erroneous readings.
NOTE: The charge indicators are not proportional.
NOTE: If the critical low warning occurs while driving (red
light on, other three flashing) do not panic. Stop when it is
safe, turn the Zinger off and back on, and wait 20 seconds
to make a reading. A long hill climb or driving in grass can
cause the indicators to identify lower voltage than under
normal use and therefore falsely show the critical low
warning with up to 15% battery life still actually remaining.
17
WARNING
!
All 4 lights ON
50% to 100% Remaining
Left 3 lights ON
Right light OUT
50% to 20% Remaining
Left 2 lights ON
Right 2 lights OUT
5% to 20% Remaining
Left red light ON
Other 3 lights OUT
Less than 5% battery life remaining.
Charge as soon as possible. To maximize
your range avoid hills, use medium speed
range, and drive directly to the nearest
location for charging.
Left red light ON
Other 3 Lights
= Flashing =
Critical low warning, charge as soon as
possible.
