Control Panel
NOTE: It's helpful to sit in the Zinger while reading this
section so that you can refer to the actual controls.
CAUTION
Use minimal force when pressing the control buttons. Use
the pad of your finger instead of a fingernail. Needless
pressure or use of fingernails can lead to premature failure
of the control buttons. After pressing a button, wait three
seconds for the Zinger to respond.
16
Beeper
Variable
Speed Trigger
Power Button
(Press and wait three seconds.
Indicators below will light when
ON.)
Forward Speed Range
Selector Button
(press slowly, check light below)
Forward Speed Range Indicator
Lights
Reverse Indicator Light
(Listen for intermittent beep.)
Reverse Mode Button
(Press once for Reverse.
Press again for Forward.)
Charge Indicator Lights
(See following page to interpret
these lights.)
Each Speed Range has a top speed limit.
L - Low
0 - 1 MPH
0 - 1.5 Km/H
M - Medium
0 - 3 MPH
0 - 5 Km/H
H - High
0 - 6 MPH
0 - 9.5 Km/H
R - Reverse
0 - 1 MPH
0 - 1.5 Km/H
