HARDWARE MAINTENANCE
9
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE YOUR PRODUCT AND VOID WARRANTY.
WARNING! -
INSPECTION, MAINTENANCE, AND STORAGE
Your scooter requires routine inspection and maintenance, it is a factor of safety. This chapter describes maintenance
steps and important operating tips. Before you perform the following operations, ensure the scooter is turned off and
charging cable is disconnected.
INSPECTING AND CLEANING YOUR SCOOTER
- Routinely check the body of the scooter and tyres for damage or excessive wear.
- Wet a clean cloth with clean water, rinse the cloth thoroughly, and wipe the body of the scooter making sure that
water does not get into the power button, charging port or tyres. If water or other liquids enter the scooter, it will cause
permanent damage to the internal components.
BRAKE
Check the brakes function properly.
A) When you apply the brake pedal, the rear wheel should stop rotating;
B) Make sure the wheels are able to rotate freely, without getting stuck/ any stopping when the brake is not applied.
FRAME, FORK AND STEERING HANDLE
Check the frame, fork and steering handle for cracks or loose connections. Check all connection elements (such as a
folding system) are correctly tightened and not broken. It is necessary and important to check the tightening of the
various bolted elements regularly.
WHEELS AND TYRES
Wear and tear is unavoidable in the wheels and the driving system in the course of operation. The user must regularly
check the wheels and the driving system for wearing and make adjustments or replacements when necessary. Please
make sure the front wheel is able to rotate freely. It is suggested to add lubricant (30SAE lubricating oil is
recommended) to the moving parts every 6 months.
BATTERY
Always switch off the power when the scooter is not in use. Never store the scooter at a low temperature, it may
damage or degrade the battery permanently.
STORING YOUR SCOOTER
- Fully charge your battery before storing.
- If you are storing your scooter for an extended period of time, please fully charge your scooter at least once every
month.
- If the ambient temperature of the storage location is below 0°C, please do not charge. You must bring the scooter into
a warmer environment before charging.
- Check under Battery Specifications for more details.
- To prevent dust from getting into your scooter, try wrapping it or sealing it with its original packaging.
- Store your scooter indoors, in a dry and suitable temperature.
CHARGER
The charger supplied with the scooter should be regularly examined for damage to the cord, plug, enclosure and other
parts. In the event of such damage the scooter must not be charged until the charger has been repaired or replaced.
NEED HELP?
Visit our website for replacement parts and product support
WWW.ZINCSPORTS.COM
Contact us at
CUSTOMERSERVICES
@
ZINCHQ.COM
or call our customer service line on
+
44
(
0
)
800 731 0006
SCOOTER SPECIFICATIONS
• Net Weight: 4.86kg
• Load: 50kg
• Max. Speed Limit: 5mph/8kph
• Max Distance: 3.7miles/6km
*The range is tested in the lab (real range depends on user weight, incline, road condition and other factors.)
• Battery: Lithium, 21.6V 2Ah
• Power Requirement: AC100-240V ~ 50/60HZ
• Size (fold): L 67.5 x W 48 x H 25cm
• Size (unfold): L 73 x W 48 x H (81.5-89.5) cm
• Tyre: Solid tyre
