Default settings
7
Page 13
(in manual mode)
10 9
(1) Selected applicator The selected applicator (left, right or both) is shown in orange. Press the
corresponding button to switch applicator.
(2) Treatment time
The remaining treatment time is displayed
(3) Temperature
The temperature in the applicator is displayed
(4) Vacuum intensity
The vacuum intensity is displayed. Press the arrows to increase or decrease the
vacuum.
Vacuum intensity: 1 – 10. The intensity is preset at 5.
(5) Operating mode
Press the corresponding button to select the operating mode (auto or manual), which
is then displayed in orange.
(6) Parameters
The parameters are displayed
(7) Start of treatment
(8) Sounds
Press the start button to start treatment.
Switches signal sounds on and off by pressing a button
(9) Background colour
(10) Reset therapy time
Changes the display background colour from dark to light and vice versa
Pressing the reset button sets the treatment time back to the beginning.
6
7
8
Summary of Contents for ZLipo Med
