Operation instructions
8
Page 15
Note:
The following recommendations are only guidelines and must of course be adapted
to the patient's individual situation.
Note:
Restrict access to the treatment room to staff who have been instructed.
Note:
Always use the cooling fleece during treatment to protect the area being treated and
to increase efficacy.
Note:
Always clean and disinfect the handpieces before each treatment session.
Treatment
The tissue in the area to be treated should be softened before treatment. This can
be done by massage or a warm cloth.
Put the cooling fleece on the area to be treated, place the liner on the fleece, and
place the applicator on top.
Make sure that there are no air pockets between the skin and the cooling fleece.
Use all the gel in the cooling fleece pack.
Once you are certain that the applicator is correctly positioned and the patient is
lying in a comfortable position, start the application (via the start button on the
screen or the start button on the actual applicator).
The patient must not be left unattended during operation. He should be asked how
he is feeling at regular intervals (at least every 15 minutes).
Please monitor the temperature on the screen for 2-3 minutes until the ideal
temperature has been reached.
If the ideal temperature does not remain steady, please stop the treatment and call
the service technician.
If the tissue is too firm to be sucked in sufficiently, you may need to increase the
vacuum.
Please do not alter the temperature during treatment.
Note:
The cooling fleece and the liner are disposable items and should not be reused.
If the applicator needs to be repositioned during application, a new cooling fleece
and a new liner must be used.
The “mini” cooling fleece and the “mini” liner are to be used
only for the application of
the mini applicator
Operation with two
applicators at the same
time
If two applicators are being used at the same time, select the medium or small
applicator size.