Use
4.1 Site preparation
4
Page 20
Assembly of the
handpiece
4.1.3 Assembly of the handpiece
1.
Multipolar handpiece
•
Handpiece 2 (multipolar) is available in three different sizes. The three
attachments can be easily changed.
•
Small black marks which you align with each other are printed on the outer
part of the neck of the cable and inside the head. Then you can attach the
head using gentle pressure.
2.
Thermal handpiece
•
The handpiece is available in two different sizes.
•
Grasp the body of the handpiece and align the grooves corresponding to the
applicator head of the handpiece. Press lightly until it clicks into place.
Disconnecting the roll
and thermal handpiece
4.1.4
Disconnecting the roll and thermal handpiece
1.
To disconnect the connection cable of the roll handpiece and multipolar
handpiece from the main device, turn the plug to the left and carefully pull it out.
2.
To disconnect the thermal handpiece from the main device, carefully pull the
connection port out.
Disconnecting the
multipolar handpiece
Switching on/off
4.1.6 Switching on/off