Zimmer PRO -V, Manual, Page: 9 / 16

www.zi mm er-instruments.com 9 | 16
New / Change value of the Output Start 2
Pressing the “ Down” key will not affect the value of
first digit, it is always 0.
Pressing the “ Up” key will advance the operation to
the next digit and set the first digit, in every case to “0”.
prompting for second digit.
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
second digit from 0 through to 9, the value will wrap from
9 round to 0,if first digit is 0.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit, in this case to “1”.
prompting for third digit.
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
third digit from 0 through to 9, the value will wrap from 9
round to 0.
Pressing the “ Up” key will advance the operation to
the next digit and set the third digit, in this case to “0”.
prompting for fourth digit. (* denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
fourth digit from 0 through to 9, the value will wrap from
9 round to 0.
Pressing the “ Up” key will advance the operation to
the “New / Changed value of the Output 2” and set the fourth digit,
Elbow
in this case to “0”.
(*Denotes that digit will be flashing).
New/changed value of the confirmed. Start Output 2
Pressing the “ Down” key will re-enter to the
“New / Change value of the Output 2”.
Start
Pressing the “ Up” key will confirm New value of the Start
Output 2 and advance to the Elbow value of Output selection
This screen allows the user to set the value of Output
Start 2(,considerd as DC Voltage).
Pressing “ Up” key will confirm the present value as
Start value of the Output 2 and advance to the Elbow
value of Output selection(section 3.1.6.2.3) or exit setup menu.
Pressing the “ Down” key will enter the “
New/Change
Start value of the Output 2 edit” mode.
3.1.6.2.2 Start value of output 2
Enter New / Change value of the Output 2, first digit entered, Start
Enter New / Change value of the Output 2, third digit entered,
Start
Enter New / Change value of the Output 2, second digit entered, Start
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
ON O/P1 O/P2 COM
Zi
mm
er
PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
New / Change value of the Output
Elbow 2
Pressing the “ Down” key will scroll the value of the
first digit from 0 through to 1, the value will wrap from 1
round to 0 depending the set End value of Output.
Pressing the “ Up” key will advance the operation to
the next digit and set the first digit, in this case to “0”.
prompting for second digit.
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
second digit from 0 through to 9, the value will wrap from
9 round to 0 depending the set End value of Output.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit, in this case to “5”.
prompting for third digit.
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
third digit from 0 through to 9, the value will wrap from 9
round to 0 depending the set End value of Output.
Pressing the “ Up” key will advance the operation to
the next digit and set the third digit, in this case to “0”.
prompting for fourth digit. (* denotes that digit will be
flashing).
Pressing the “ Down” key will scroll the value of the
fourth digit from 0 through to 9, the value will wrap from
9 round to 0 depending the set End value of Output.
Pressing the “ Up” key will advance the operation to
the “New / Changed value of the Output 2” and set the fourth digit, Elbow
in this case to “0”.
(*Denotes that digit will be flashing).
New/changed value of the confirmed. Elbow Output 2
Pressing the “ Down” key will re-enter to the
“New / Change value of the Output 2”.
Elbow
Pressing the “ Up” key will confirm New value of the Output 2 Elbow
and exit setup menu.
This screen allows the user to set the value of Output Elbow 2(,considerd as DC Voltage).
Pressing “ Up” key will confirm the present value as
Elbow value of the Output 2 and exit setup menu.
Pressing the “ Down” key will enter the “
New/Change
Elbow
value of the Output 2 edit” mode.
3.1.6.2.3 Elbow value of output 2
Enter New / Change Elbow value of the Output 2, first digit entered,
Enter New / Change Elbow value of the Output 2, third digit entered,
Enter New / Change Elbow value of the Output 2, second digit entered,
ON O/P1 O/P2 COM
O/P 2
ON O/P1 O/P2 COM
O/P 2
ON O/P1 O/P2 COM
O/P 2
ON O/P1 O/P2 COM
O/P 2
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er
PRO
-V
O/P 2
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
O/P 2
The Elbow value can be set any value between set Start value of Output and End value of Output.
This screen appears only when Elbow function is enabled.
Start value of Output can be set up to 20% of set End value of Output.
(section 3.1.6.2.3) or exit setup menu.
Zimmer
PRO
- V