INSTALLATION AND OPERATING INSTRUCTIONS:
O-ring assembly gripper, pneumatic, GS series
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
14
EN / 2020-11-30
DDOC00228 / g
7.5 Setting the stroke limitation
The stroke limitation of the product is to be set as described
in the following:
• By turning the adjustment ring
cs
, you can adjust the
stroke of the spread jaws to the respective O-ring.
To prevent the stroke limitation from being unintentionally
adjusted, the adjustment ring
cs
must be secured using a
locking screw
ct
.
cs
Adjustment ring (stroke limitation)
ct
Locking screw
NOTICE
The adjustment ring
cs
can be turned a maximum of 3.5 revolutions.
Ö
This maximum number of revolutions is only possible when the bleeding has been done!
Turning clockwise:
Ö
Expansion decreases (product in position as shown in the
adjacent image).
Turning counterclockwise:
Ö
Expansion increases (product in position as shown in the
adjacent image).
Rotating the adjustment ring
cs
modifies the path that the
piston for the spread jaws
ct
can travel.
Ö
Dimension A
The position of the limit stop
cu
determines the opening
stroke of the spread jaws
ct
.
Ö
Piston pushes the taper between the spread jaws
ct
.
Revolution
Height adjustment
Expansion
1
1 mm
± 1 mm
3/4
0.75 mm
± 0.75 mm
1/2
0.5 mm
± 0.5 mm
1/4
0.25 mm
± 0.25 mm
