9
10 Installation
WARNING
Risk of death due to unsuitable lifting equipment
►
Use suitable lifting equipment for overhead assembly or disassembly of the product if the dead weight of the
product is > 3 kg.
WARNING
Risk of injury from crushing
Removing the cover of the wedge hook transmission results in a crushing hazard between the gripper jaws.
Crushing injuries can result from the gripping process.
►
Make sure that there are no parts of the body in the range of movement of the product!
►
Only permit installation, maintenance and servicing work to be carried out by trained personnel.
►
Do installation, maintenance and servicing work in jog mode only.
WARNING
Risk of injury due to uncontrolled movements
Risk of injury in case of unexpected movement of the machine or system into which the product is to be installed.
►
Switch off the energy supply of the machine before any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
►
For spring-assisted products, wait until the gripper jaws reach the end position with the system depressurized.
CAUTION
Risk of injury due to uncontrolled movements
Risk of injury in the event of uncontrolled movement of the product when the power supply is connected.
►
Switch off the power supply to the machine before carrying out any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
CAUTION
Risk of injury from impact
When the gripper jaws are opening, there is a risk of impact in the guide area.
NOTICE
Installation may only be carried out by qualified personnel in accordance with these installation and operating
instructions.
►
Switch off the power supply before any assembly, installation or maintenance work.
INSTALLATION AND OPERATING INSTRUCTIONS:
GPP5000, GPD5000
DDOC00196 / m
EN / 2023-06-05
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Summary of Contents for GPP5025N-00-A
Page 2: ......
