Zimmer enPuls, Instructions For Use Manual

Page: 30 / 52

Technical information
9
Page 21
Basic device
Power supply 100 – 240 V / 50/60 Hz; 220 V / 60 Hz
Fuse 2 x T3A15L, 250V
Power consumption 250 VA
Protection class I
Use class BF
Applied part Applicator head
Silicone protection cap
Frequency range 1 Hz – 22 Hz, adjustable in 1 Hz increments
3 burst modes with 4, 8 or 12 pulses
Pulse energy levels 60 – 185 mJ (at the applicator) freely adjustable in 10 mJ increments
at 22 Hz max. 90 mJ
at 16 Hz max. 120 mJ
at 10 Hz max. 185 mJ
Operating mode Interval operation
Accuracy
±
20%
Dimensions 322 mm x 235 mm x 130 mm
Weight 2.7 kg
IP class Device IPX0
Foot switch IPX5
Handpiece IPX0
Handpiece enPuls 2.2
Dimensions Length 230 mm, diameter 50 mm
Weight 850 g
Length of service 2,000,000 shocks (at least)
Applicator heads 6 / 15 / 25 mm diameter / no tools needed for switching
150,000 shocks guaranteed
Total device
Dimensions 580 mm x 250 mm x 470 mm (complete with bag)
Total weight 13 kg (complete with case)
Operation 10 to 25°C, 20% to 80% relative humidity, without condensation
at 700 hPa – 1060 hPa
Storage and
transport
-10°C to +50°C, 10% to 90% relative humidity, without condensation
at 700 hPa – 1060 hPa
Note: Storage and transport only in original packaging.
Subject to technical changes!