manualshive.com logo in svg

Zimmer emFieldPro, Instructions For Use Manual, Page: 34 / 48

Share
Download
Zimmer emFieldPro Instructions For Use Manual Download Page 34

 

Safety and Maintenance 
 

 

14 

 

 

 

 

Page 24 

 

 

 

 

The emField

Pro

 is manufactured according to the safety regulations of IEC 60601-1.  

 

As manufacturer, Zimmer MedizinSysteme GmbH can only be considered 

responsible for the safety and reliability if: 
 
- the device is operated using a proper power outlet that is properly grounded and 

the electrical installation complies with DIN VDE 0100 part 710, 
- the equipment is operated in accordance with the instructions for use,  
- extensions, readjustments or modifications are carried out only by persons 
authorized by Zimmer MedizinSysteme GmbH 
- the user is satisfied regarding the functional safety, the proper condition and 

mechanical integrity prior to using of the device,  
- the device is operated only by properly trained personnel,  
- the device is not operated in hazardous areas and / or a combustive atmosphere,  

- the device is immediately disconnected from the mains in the event of the 
penetration of liquids. The device does not contain any parts that can be serviced by 

the operator. 
 

The device does not contain any parts that can be repaired by the operator. 

 

Modification of this device is not permitted. 

Service and replacement of components may only be performed by certified service 

technicians from Zimmer MedizinSystems GmbH. 

 

 

 

 

 

 

Summary of Contents for emFieldPro

















































Reviews:

No comments