8
3 Proper use
NOTICE
The product is only to be used in its original state with its original accessories, with no unauthorized changes and
within the stipulated parameter limits and operating conditions.
Any other or secondary use is deemed improper.
►
Operate the product only in compliance with the associated installation and operating instructions.
►
Operate the product only when it is in a technical condition that corresponds to the guaranteed parameters
and operating conditions.
Ö
Zimmer GmbH shall accept no liability for any damage caused by improper use. The operator bears sole
responsibility.
The product is designed exclusively for electric operation using a 110 - 230 V AC power supply.
The product must always be mounted on materials that dissipate heat.
The product is used in accordance with proper use in closed rooms for rotating with position accuracy.
The product is not suitable for rotating workpieces during a machining process.
Direct contact with perishable goods/food is not permitted.
4
Personnel qualification
Installation, commissioning and maintenance may only be performed by trained specialists. These persons must have read
and understood the installation and operating instructions in full.
5 Product description
5.1 Type plate
A type plate is attached to the housing of the product.
XXX
XX-XXXXXX
am
an
The article number and confirmation number are shown on the type
plate.
am
Article number
an
Confirmation number
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
DES
DDOC00192 / f
EN / 2022-07-20
