Z8 Encore!
®
Z8F642 MCU
Evaluation Kit Quick Start Guide
Page 3
QS002802-0703
Installing the ZDS II Z8 Encore!“ Software
3. Slide the new plug configuration into the slot until it snaps into place.
4. Plug the power supply into an electrical outlet.
Figure 1. Evaluation Board External Connections
Hewlett Packard Power Cord Method
1. Attach a power cord (purchased separately) featuring an AC plug at one end and a
Hewlett Packard socket on the other end to the Hewlett Packard power cord
receptacle at the plug end of the power supply.
2. Plug the power supply into an electrical outlet.
Installing the ZDS II Z8 Encore!
®
Software
Perform the following steps to install the software tools:
1. Load the ZDS II CD into the CD-ROM drive of the host PC. The CD launches
DemoShield automatically and provides a menu to install the product and
Universal
Evaluation
Board
Host PC
Serial Port
To Electrical
Outlet
P2
J1
Smart
Cable
HP Power
Cord
Receptacle
Power Supply
electronic components distributor
