Copyright ©2008 by Zilog
®
, Inc. All rights reserved.
www.zilog.com
Introduction
This User Manual describes how to setup and use Zilog’s Z8 Encore!
®
Smart Cable with
Z8 Encore!
development kit. This can also be used for Z8 Encore! XP
®
development kit.
The Z8 Encore! Smart Cable converts the RS-232 signals into the 3.3 V bidirectional
open-drain signals required to communicate using the DBG pin to the Zilog on-chip
debugger of the Z8 Encore!. The Smart Cable features a 9-pin DB serial connector on one
end and a box with a 6-pin DBG Interface Connector on the other end.
The development kit includes the following (see
Figure 1
):
•
Smart Cable
•
User Manual
Figure 1. Z8 Encore! Smart Cable
Z8ENCORE000ZAC
Z8 Encore!
®
Smart Cable
User Manual
UM016207-0508
