ZiLOG Z51F0811 MCU, User Manual

Page: 18 / 42

Install the Z8051 OCD Software and Documentation UM024201-0212
8
Z51F0811 MCU Evaluation Kit
User Manual
3. The installation process will begin and you should observe output similar to the fol-
lowing messages on the screen of your PC:
32-bit OS detected
<installation path>\dpinstx86.exe
Installation driver
FTDI CDM driver installation process completed.

4. When the installation is complete, plug in the Mini-B connector of the second USB
cable into the Board, and the larger A connector into the USB port of your PC. Again,
refer to
Figure 3 on page 5 for guidance.
5. If the driver installation was successful, the Ports (COM & LPT) section of the Device
Manager will display USB Serial Port (COMx) or similar message, as highlighted in
Figure 6.
Figure 6. A Successful USB-to-UART Driver Installation