Z8 GP™ ZGP323 In-Circuit Emulator
User Manual
UM019606-0408
Introduction
3
2. DemoShield provides several installation options to install ZDS II,
select
Install ZDS II
. You can install other software and accompany-
ing documentation later.
3. Follow the instructions on the screen to complete the installation.
Hardware Installation
The ZGP323 ICE features an Ethernet interface, a USB interface, and an
RS-232 serial port. Hardware installation consists of the following:
•
•
Connecting ZGP323 ICE to the Target Pod
•
Connecting ZGP323 ICE to OTP Programming Module (Optional)
•
You have to reconfigure network settings on the PC or on the ZGP323
ICE before using the emulator.
Connecting Target Pod
Use an appropriate target pod and pin converter to connect the ZGP323
ICE to the target board.
on page 4 illustrates the ZGP323 ICE top
panel connectors and
on page 4 illustrates the ZGP323 evalua-
tion board included with the kit. The 20- and 28-PDIP target pods plug
into the associated PDIP sockets on the target board. For example, if your
target board has a 20-SOIC socket, mate the 20-PDIP target Pod onto the
20-PDIP to 20-SOIC converter. Then install the target pod and converter
assembly into the board’s 20-SOIC socket