18
c) Under MIG mode, pressing
BURN BACK ,the indicator lights up, which can realize high
speed wire feeding(Chart 6).
multifunctional data display would flash continuously until
pressing the torch switch or any key or knob on the panel. Both
multifunctional data
display
and
BURN BACK
stops flashing, and the wire stops feeding.
Chart 5: Preset voltage display under MIG mode
Chart 6: Burn back display under MIG mode
d) Under MIG mode, press the
Gas check
,the indicator lights up, which can realize gas
check function(chart 7).
multifunctional data display
would flash continuously until
pressing the torch switch or any key or knob on the panel. Both
multifunctional data
display
and
GAS CHECK
stops flashing, and the gas stops checking.
Chart 7: Gas check display under MIG mode
e) Under MIG mode, operate
VRD/2T/4T switch key
to choose the welding mode. 2T
NORMAL lighting up means 2 step control way: press the torch switch, feed the gas in
advance, and perform welding normally; release the torch switch, burn back and get rid of
the ball on the end of wire, then stop feeding gas 3 seconds later. While, 4T LATCH
lighting up means 4 step control way: press the torch switch for the first time, feed the gas
in advance, and ignite the arc to perform welding; then release the torch switch and
perform welding normally. Press the torch switch for the second time, the welding current
