Version Number: MIG200-20210914A1
10
Face the side marked 0.030” away from the machine.
Remarks:
1. There are two grooves on one wire feed wheel, one side is 0.030” (0.8mm) and the other side is
0.040” (1.0mm) to match the corresponding wire diameter.
2.
Gas welding requires the use of V-type wire feed wheels, which are suitable for ordinary carbon
steel welding wire and stainless steel welding wire, and need to use CO2 gas or CO2 and Argon
gas mixture.
3.
Gear wire feed wheel, gear wire feed wheel is suitable for flux-cored welding wire, our
standard configuration has 1 piece of 1kg flux-cored welding wire, which can be directly installed
and used.
1.4 Feed wire and set pressure