ZGR SOLAR STR 250
Operation manual
www.zigor.com
17
Fig. 4-11 Level the assembled mounting-bracket and mark the positions for drilling holes
3)
Secure the mounting-bracket with bolts (Fig. 4-12 and Table 4-3).
Fig. 4-12 Fastening sequence
ITEM COMPONENTS
DESCRIPTION
A
Mounting-bracket
-
B
Full threaded bolt
M10*35
C
Metal bracket
-
D
Flat washer
-
E
Spring washer
-
F
Hex nuts
M10
Table 4-3 Fastening sequence
4)
Take out the inverter from the packing case.
5)
Hoist the inverter to the installation position when necessary (refer to 4.3.2). If the installation position is
not high enough, skip performing this step.
6)
Hang the inverter to the mounting-bracket and ensure that the mounting ears perfectly engage with the
mounting-bracket (Fig. 4-13).
Fig. 4-13 Hang the inverter
7)
Fix the inverter with two M6×35 screws (Fig. 4-14).
