Zigmund & Shtain EN 118.511 S, User Manual

Page: 19 / 47

19
REPLACING OVEN LAMP
WARNING:
To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and en
-
sure that appliance is cold.
Remove the glass protection by turning as
indicated in the igure on the left side. If you
have dificulty in turning, then using plastic
gloves will help you in turning.
Then remove the lamp by turning, install the
new lamp with same speciications. Lamp
speciications must be as follows;
-220-240 V 50/60 Hz AC, -15 W, -Type E14
Reinstall glass protection, plug the power cable
of appliance into electrical socket and complete
replacement. Now you can use your oven.
CLEANING OVEN GLASS
Lift by pressing on plastic latches on left and right side as shown in
Figure 13 and pulling the proile toward yourself as in Figure 14. Glass
is released after proile is removed as shown in Figure 15. Remove the
released glass by pulling toward yourself carefully. Outer glass is ixed
to oven door proile. You can perform glass cleaning easily after glasses
are released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that pro
-
ile is seated properly in place.
Figure 11
Figure 12
Figure 13 Figure 14 Figure 15
GB