Zigmund & Shtain CZ5702733, Instruction Manual

Page: 3 / 14

1
Safety
• The electrical equipment of the hob must have circuit
breakers installed in accordance with national and local
regulations.
• The appliance must be installed and wired by an authorised
installer in accordance with the manufacturer’s instructions
and diagrams.
• Electrical equipment specifications must be suitable for
the maximum power indicated on the reference plate. The
electrical socket must be grounded in accordance with
applicable regulations.
• If the power cord is damaged, it must be replaced by the
manufacturer, after-sales technical service or similar qualified
technician to avoid hazard.
• CAUTION! If the glass surface cracks or breaks the appliance
must be immediately disconnected from the mains to avoid
short circuit and electrical shock.
• The appliance must not be used before the glass is replaced.
The glass should be replaced by the after-sales service or by
qualified personnel (4.1.1).
• Do not place hot pots and pans on the sensors. This may
damage the electronic circuits (4.1.3).
• CAUTION! During operation, the casing and open parts of the
appliance may become very hot. Avoid touching the heating
Important
Keep this manual with the appliance. If you sell or give
the appliance to another person, make sure you also
pass on the instruction manual. Read the provided
instructions thoroughly before using and installing the
appliance. They are designed to protect your own and
others’ safety.
Instruction Manual
Very important: Read this instruction manual thoroughly. It will help you operate the hob properly and
safely.
This manual is designed so that the texts relate to the corresponding figures.
e n g l i s h