zigencorp.com
Toll Free: 877-650-5252
International: +1 818-654-5252
Command Syntax
RS-232 & IP Commands
–
note the same commands are available via RS-
232 and IP
–
use @ for RS232, nothing for IP.
RS-232
@SW41-XXXX(last 4 of SN)
<sp> <parameter> <sp>... <parameter> <sp>
<end of response>
Default RS232 Protocol Settings (can be changed in WebOS if required):
Baud Rate = 115200 Data Bits = 8
Parity = None
Stop Bit = 1
Flow control = None
IP
DA14-XXXX
<sp> <parameter> <sp>... <parameter> <sp> <end of response>
Commands (shown in RS-232 format):
Help
@SW41-XXXX help
Shows a list of available commands
Disco
@SW41-XXXX disco
I can’t get this to work…..
Uptime
@SW41-XXXX uptime
Shows day, hours, minutes and seconds the SW41 has been running.