14 ZIG-‐SW41 USER MANUAL
Note: To use WebOS EDID management make sure DIP 1 is ON (UP)
Active EDID table is shown. You can load one of the presets from the previous
page or load a custom EDID table from your PC
–
simply browse and upload the
custom EDID if required.
Admin/Firmware/Reset/Info
• Serial Number –
serial number of SW41
• Firmware –
Current firmware revision
• Hardware –
for internal use
• IP Address –
IP address of the unit assigned by your DHCP Server
• Hostname –
this is what you want to call the unit –
syntax example
CR100RX_k123. This is also the name you type into your browser to
access the WebOS. Don
’
t us spaces or special characters.
• Factory Reset –
will erase user entered date like installer notes.
• Choose File/Upload Firmware –
when necessary, this is where you select
a new firmware file and upload firmware.
• Reset DA14 –
will reset the ZIG-SW41 remotely.
• Install Update –
when necessary is for installing new software updates to
the unit.