16
IR Receiver Cable Directions
Plug the IR receiver into the ZIG-POC-100-
Tx “IR IN” port and place the IR
receiver so you can point to it easily with your IR remote controller.
The IR receiver is designed to work on the “Rx” receive side of the extender.
The IR input on the “Tx” transmitter side is designed to receive commands
directly from control processor and is not intended to be used in conjunction
with IR receiver.
IR Emitter Directions:
Plug any third party IR emitter into the ZIG-POC-100-
Tx “IR OUT” port and
place the IR sensor directly on the IR window on the front panel of the device
you intend to control.
Con
n
ecti
on
